Envirosun AS Split Solar Hot Water System
Envirosun Installer does↓
- Install, connect and secure Envirosun solar collector panels to the roof of the premises, in a confirmed location as per Envirosun specifications
- Connect and secure the Envirosun solar panel sensor to the hot outlet of solar collector.
- Run 1m copper tails from flow and return lines from solar panels into roof space
- Install sensor cable into roof space
- Seal roof in approved manner with dektites
Required to be completed by others↓
- Connects to copper flow and return lines inside the roof space to the storage tank location
- Run sensor cable (previously connected to solar panels) to the storage tank location with the flow pipe
- Final fit out of storage tank
- Connect solar pump to storage tank
- Connect sensor to pumping module
- All plumbing and electrical as per Envirosun specifications and regulations
NOTE/- Your plumbing contractor does not have to get on the roof for this installation, under no circumstances is the solar hot water panels to be pressurised during plumbing roughin test
